BVM-E250A

Richiedi Informazioni



TRIMASTER EL™ reference monitor with dramatically improved viewing angle for critical picture evaluation

For professional applications such as colour grading, high-end editing, broadcasting and scientific research, Sony’s leading edge Organic Light-Emitting Diode (OLED) technology and signals processing technology ensures absolutely outstanding performance with the BVM-E250A. The colour shift depending on the viewing angle has reduced to less than half compared to a conventional OLED panel. It allows several people to evaluate the image with extreme accuracy at the same time, increasing the monitor’s versatility in top end monitoring solutions.

State-of-the-art product

Super Top Emission technology enhances OLED’s intrinsic benefits to deliver outstanding black performance, a quick response time with virtually no motion blur, and a wide colour gamut. A 12-bit output digital signal processing engine provides a nonlinear cubic conversion colour-management system that delivers precise colour reproduction, stunning picture uniformity, smoother-than-ever gamma performance, and picture quality consistency.

Accepts computer signals via HDMI

The BVM-E250A accepts various computer signals input up to 1920 x 1080 through its HDMI connector. It is also equipped with Digital Cinema features.

 

Technical Specifications

Please be aware that the features/specifications can differ from country to country

Collapse all

Picture Performance

Panel OLED panel
Picture size (diagonal) 623.4 mm (24 5/8 inches)
Effective picture size (H x V) 543.4 x 305.6 mm (21 1/2 x 12 1/8 inches)
Resolution (H x V) 1920 x 1080 pixels (Full HD)
Aspect 16:9
Pixel efficiency 99.99%
Panel drive RGB 10-bit
Panel frame rate 48 Hz / 50 Hz / 60 Hz / 72 Hz / 75 Hz(48 Hz, 60 Hz, and 72 Hz are also compatible with 1/1.001 frame rates)
Viewing angle (panel specification) 89°/89°/89°/89° (typical) (up/down/left/right contrast >10:1)
Standard luminance 100 cd/m2 (preset1 to preset5) 48 cd/m2 (preset (D-Cine)) (1.0 Vp-p reference signal, 100% white signal input)

Input

SDI BNC (x2)
HDMI HDMI (x1) (HDCP correspondence, deep colour correspondence)
DisplayPort DisplayPort connector x1 - (DisplayPort will be supported from the monitor software version 1.1 or later.)
Option port 4 ports
Parallel remote D-sub 9-pin (female) (x1)
Serial remote (LAN) Ethernet (10BASE-T/100BASE-TX), RJ-45 (x1)

Output

SDI BNC (x1)
DC 5V out Circle 4-pin (female) (x1)

General

Power requirement AC 100 V to 240 V, 1.6 A to 0.8 A, 50/60 Hz
Power consumption Approx. 72 W normally with input from a standard HDMI input. Approx 145 W at maximum load, with four option slots in use and maximum luminance compensation for any deterioration due to aging.
Dimensions (W x H x D) 576.0 x 424.0* x 148.0 mm (22 3/4 x 16 3/4 x 5 7/8 inches) * Height without legs
Mass 13.0 kg (28 lb 11 oz)

Supplied Accessories

  AC power cord x1
  AC plug holder x1
  Bracket x1
  Operation Manual (Japanese, English), each x1
  CD-ROM x1
  Using the CD-ROM Manual x1